7600-SIP-200 (USED) (USED) Original price was: $1,458.00.Current price is: $1,385.10.
Back to products
HWIC-1B-U Original price was: $339.00.Current price is: $322.05.

7600-SIP-400 (USED) (USED)

Original price was: $9,188.00.Current price is: $8,728.60.

Model: 7600-SIP-400 Catalyst 6500 Service Module
Details: Cisco 7600 Series SPA Interface Processor-400
Condition: Used
Warranty: 3 Years Warranty.

Description

7600-SIP-400 (USED) (USED) Overview

Quick Specs Figure 1 shows the appearance of 7600-SIP-400 (USED) (USED).

Table 1 shows the Quick Specs.

Compatibility Cisco Route Switch Processor 720 3C/3CXL, Cisco Supervisor Engine 720-3B/3BXL, and Cisco Supervisor Engine 32 (Sup-32) systems
Minimum softwareCompatibility Cisco IOS® Software Release 12.2(18)SXE, or later releases for Supervisor Engine 720-3B/3BXL and Supervisor Engine 32 systems in native mode Cisco IOS Software; also, 12.2(33)SRB or later releases for RSP720-GE-3CXL and RSP720-GE-3C systems
Protocols ●  TCP●  User Datagram Protocol (UDP)●  IPv4 Unicast and Multicast●  IPv6 Unicast and Multicast●  Multiprotocol Label Switching (MPLS)●  SAToP and CESoPSN
Encapsulation ●  Frame Relay●  Point-to-Point Protocol (PPP)●  High-Level Data Link Control (HDLC)●  ATM permanent virtual circuit-constant bit rate (PVC-CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR)●  ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, UBR+●  TDM over MPLS, ATM over MPLS, and ATM over GRE●  L2TPv3
Cards, ports, and slots Four SPA bays per Cisco 7600 SIP-400
Features QoS, ACLs, and Low-Speed Aggregation FeaturesQoS●  Modular QoS CLI (MQC)●  Classification based on:◦   IP Precedence (IPv6 and IPv4)◦   Diffserv code point (DSCP) (IPv6 and IPv4)◦   MPLS experimental values (MPLS EXP)◦   Extended ACL◦   ATM CLP◦   Frame Relay DE◦   Class of Service (CoS)◦   VLANCongestion Avoidance●  Weighted Random Early Detection (WRED) based on IP Precedence, DSCP, MPLS EXP, ECN (mark IP TOS field for POS traffic)Queuing●  Congestion management◦   Per-virtual circuit queuing◦   Ingress and egress Low-Latency Queuing (LLQ)◦   Egress Class-Based Weighted Fair Queuing (CBWFQ)Traffic Classification, Shaping, and Bandwidth Policing●  Marking●  Policing●  Distributed traffic shaping (DTS)●  Hierarchical service policiesSecurity●  Standard and extended ACLsLayer 2 and Layer 3 VPNs●  Ethernet over MPLS (EoMPLS)●  ATM over MPLS (ATM over MPLS)◦   ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single and packed cell relay virtual circuit mode●  Frame Relay over MPLS (FRoMPLS)●  Layer 3 MPLS/VPN over GRE●  ATM over GRE, Ethernet over GRE●  TDM over MPLSHigh availability●  IPv4 Nonstop Forwarding (NSF)●  IPv4 Stateful Switchover (SSO)●  Automatic Protection Switching (APS) with ATM, POS SPAs●  OIR for both SIP and SPAMultilink support●  Frame Relay Multilink^1 (1) Added in >15.2(04)S
Memory 1 GB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) per Cisco 7600 SIP-400
Supported SPAs Following SPAs are supported on SIP-400 release wise7600-SIP-400 – POS SPAs Support
SPA ID Project/Family
SPA-2XOC3-POS Sphinx
SPA-4XOC3-POS Sphinx
SPA-1XOC12-POS Sphinx
SPA-1XOC48-POS Iguana
SPA-4XOC3-POS-V2 Gladiator
SPA-8XOC3-POS Gladiator
SPA-2XOC12-POS Gladiator
SPA-4XOC12-POS Gladiator
SPA-2XOC3-ATM Warlord
SPA-4XOC3-ATM Warlord
SPA-1XOC12-ATM Warlord
SPA-1XOC48-ATM Ronin
SPA-3XOC3-ATM-V2 Barbarian
SPA-1XOC3-ATM-V2 Barbarian
SPA-1XOC12-ATM-V2 Barbarian
SPA-2X1GE Wanda
SPA-2X1GE-V2 Wanda
SPA-5X1GE-V2 Cricket
SPA-1X10GE-V2 Scorpion
SPA-2X1GE-SYNCE SyncE
SPA-4X1FE-TX-V2 FastEthernet
SPA-8X1FE-TX-V2 FastEthernet
SPA-24XT1E1-CE Velvet Hammer
SPA-1XOC3-CE Black Russian
SPA-2XT3E3-CE White Russian
SPA-2XT3E3 Javelin
SPA-4XT3E3 Javelin
SPA-8XCHTE1 Maverick
SPA-CHOC3-STM1 Prowler
SPA-2XCT3 Patriot
SPA-4XCT3 Patriot
SPA-4XT-SERIAL DocOct
SPA-CHOC12-STM4 Chopper
SPA-1XCHOC48/DS3 Trex
SPA-2XT3/E3-V2 Javelin-V2
SPA-4XT3/E3-V2 Javelin-V2
SPA-8XCHT1/E1-V2 Maverick-V2
SPA-1XCHSTM1/OC3-V2 Prowler-V2
SPA-2XCT3/DS0-V2 Patriot-V2
SPA-4XCT3/DS0-V2 Patriot-V2
Environmentalconditions ●  Operating temperature: 32 to 104°F (0 to 40°C)●  Storage temperature: -40 to 167°F (-40 to 75°C)●  Relative humidity: 10 to 90 percent, noncondensing●  Operating altitude: -60 to 2000m
MIBs ●  Cisco Entity MIB (CISCO-ENTITY-MIB)●  Cisco Entity Asset MIB●  Cisco Entity Field-Replaceable Unit (FRU) Control MIB●  Cisco Entity Alarm MIB●  Interface IF MIB (RFC 2233)●  Frame Relay MIB (RFC 1315)●  Cisco Frame Relay MIB●  ATM MIB (RFC 1695)●  Definitions of Managed Objects for Bridges (RFC 1493)●  Evolution of Interfaces Group of MIB-II (RFC 1573)●  SNMP MIB II (RFC 1213)●  Remote Monitoring (RMON) MIB (RFC 1757)●  Switch Monitoring (SMON) MIB
Network management Supported with CiscoWorks CiscoViewCiscoWorks Resource Manager Essentials (RME)Cisco IP Solution Center (ISC)
Physical specifications ●  Occupies one slot in a Cisco 7600 Series router●  Supports up to 12 Cisco 7600 SIP-400s in a 13-slot chassis●  Requires Supervisor Engine 720-3B or 720-3BXL●  Dimensions (H x W x D): 1.75 x 15.375 x 16 in.●  Weight: 16 lbs not including the packaging
Power 185W power consumption per Cisco 7600 SIP-400265W maximum power consumption with 4 SPAs
Indicators Cisco 7600 SIP-400 status: green (operational); orange (faulty)
Regulatory complianceSafety CE marking●  UL 60950●  CSA C22.2 No. 60950●  EN60950●  TS001●  IEC 60950●  AS/NZS3260●  UL60950EMC●  FCC Part 15 Class A●  ICES-003 Class A●  VCCI Class A●  EN55022 Class A●  CISPR22 Class A●  AS/NZS3548 Class A●  EN61000-3-2●  EN61000-3-3●  EN61000-3-1●  EN55024●  EN50082-1●  EN300 386
Standards Telecommunications●  TU-T G.610●  ITU-T G.703●  ITU-T G.707●  ITU-T G.783 Sections 9-10●  ITU-T G.784●  ITU-T G.803●  ITU-T G.813●  ITU-T G.825●  ITU-T G.826●  ITU-T G.841●  ITU-T G.957 Table 3●  ITU-T G.958●  ITU-T I.361●  ITU-T I.363●  ITU I.432●  ITU-T Q.2110●  ITU-T Q.2130●  ITU-T Q.2140●  ITU-T Q.2931●  ITU-T O.151●  ITU-T O.171●  ETSI ETS 300 417-1-1●  ACA TS 026 (1997)●  BABT/TC/139 (Draft 1e)

Get more information
Do you have any question about the 7600-SIP-400 (USED) (USED)?
Contact us now via Live Chat or sales@metafinitivetech.com

Warrenty Description

100% Low Price Guarantee: Metafinitivetech.com provides high-quality products at low wholesale prices

100% Quality Assurance: All items are ORIGINAL and GENUINE only. Item conditions are “New Sealed” or “Used / Refurbished”. Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support: Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee: You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment: Verified authorization: Mcafee Secure, VeriSign Secured