ASR-9006-DC
Model: ASR-9006-DC Cisco ASR 9006 Series Chassis
Details: Cisco ASR 9006 ChassisASR-9006-DCASR-9006 DC Chassis
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
ASR-9006-DC Overview
Quick Specs Figure 1 shows the appearance of ASR-9006-DC.
Table 1 shows the Quick Specs.
| Description | Cisco ASR 9006 Chassis, ASR-9006-DC, ASR-9006 DC Chassis |
| Physical specifications | Height: 17.50 in. (444.5 mm) (10 RU)Width: 17.38 in. (441.45 mm)Depth:· With doors: 29.05 in. (737.9 mm)· Without doors: 29.05 in. (737.9 mm)Weight:· 89.55 lb (40.7 kg) (chassis with PEM)150 lb (65.91 kg) (fully loaded, excluding line cards and power modules) – RSP, two v2 FAN trays, PEMs |
| Slot orientation | Horizontal |
| Cisco ASR 9000 Series RSP | Dual redundant RSPs with integrated fabric in 2 slots |
| Cisco ASR 9000 Series line cards | 4 line-card slots |
| “Commons” components | 2 RSPs2 fan trays1 PEM (either DC or AC)1 fan filter |
| Reliability and availability | Fabric redundancyFan redundancyFeed redundancyPower-supply redundancyRSP redundancySoftware redundancy |
| Rack mounting | 19-in. default21- and 23-in. adapters availableNote: Minimum 17.75-in. opening between posts is needed for proper operation |
| Cabinet mounting | YesNote: Doors not recommended in enclosed cabinets |
| Wall mounting | No |
| Airflow | Right-to-back, Front-to-back with baffle |
| Fabric | One per RSP:· Active/active nonblocking operation mode in dual-RSP redundant configuration· Fully redundant in dual-RSP redundant configuration· Built-in service-intelligence and traffic-prioritization capability |
| Thermal | Two fan trays:· 6 high-efficiency fans per tray· Variable-speed fans for optimal thermal performance· No single point of failure |
| Modularity | Pay-as-you-grow power for future scalability, available in AC and DC.Multiple power module types:· 3 kW AC power module· 2.1 kW DC power moduleNote: Mixing of AC and DC modules is not supported |
| Redundancy | · AC: N+N redundancy· DC: N+1 redundancy· Power module redundancy· A/B Feed redundancy |
| Power zones | No power zone restrictionsFully load-sharing power infrastructure |
| Power input | Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) |
| Power-module airflow | Front-to-back |
| Operating temperature (nominal) | 41 to 104ºF (5 to 40ºC) |
| Operating temperature (short-term) | ASR 9006: 23 to 131ºF (-5 to 55ºC)ASR 9010: 23 to 122ºF (-5 to 50ºC) |
| Operating humidity (nominal) (relative humidity) | 5 to 90% |
| Storage temperature | -40 to 158ºF (-40 to 70ºC) |
| Storage (relative humidity) | 5 to 93% |
| Operating altitude | -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9006 is designed to meet:· SR-3580: NEBS Criteria Levels (Level 3)· GR-1089-CORE: NEBS EMC and Safety· GR-63-CORE: NEBS Physical Protection· VZ.TPR.9205: Verizon TEEER |
| ETSI standards | Cisco ASR 9006 is designed to meet:· EN300 386: Telecommunications Network Equipment (EMC)· ETSI 300 019 Storage Class 1.1· ETSI 300 019 Transportation Class 2.3· ETSI 300 019 Stationary Use Class 3.1 |
| EMC standards emission | Cisco ASR 9006 is designed to meet:· FCC Class 47CFR15 A· ICES 003 Class A· AS/NZS CISRP22 Class A· CISPR 22 (EN55022) Class A· VCCI Class A· BSMI Class A· IEC/EN 61000-3-12: Power Line Harmonics· IEC/EN 61000-3-11: Voltage Fluctuations and Flicker· EN55022: Information Technology Equipment (Emissions)· EN 50121-4: Railway EMC |
| EMC standards immunity | Cisco ASR 9006 is designed to meet:· IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)· IEC/EN-61000-4-3: Radiated Immunity (10V/m)· IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)· IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)· IEC/EN-61000-4-5: Signal Surge Ports (1kV)· IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)· IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)· IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)· IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations· EN55024: Information Technology Equipment (Immunity)· EN50082-1/EN-61000-6-1: Generic Immunity Standard· EN 50121-4: Railway EMC |
| Safety | Cisco ASR 9006 is designed to meet:· UL/CSA/IEC/EN 60950-1· IEC/EN 60825 Laser Safety· ACA TS001· AS/NZS 60950· FDA Code of Federal Regulations Laser Safety |
Get more information
Do you have any question about the ASR-9006-DC?
Contact us now via Live Chat or sales@metafinitivetech.com
