CISCO7606= (USED)
CISCO7606= (USED) Original price was: $2,475.00.Current price is: $2,351.25.
Back to products

SPA-1XCHOC48/DS3

Original price was: $69,091.00.Current price is: $65,636.45.

Model: SPA-1XCHOC48/DS3 Cisco ASR 9000 Series Shared Port Adapter
Details: Cisco ASR 9000 Adapter SPA-1XCHOC48/DS31-port Channelized OC48 to DS3 SPA
Condition: New Factory Sealed
Warranty: 3 Years Warranty.

SKU: SPA-1XCHOC48/DS3 Categories: , ,
Description

SPA-1XCHOC48/DS3 Overview

Quick Specs Figure 1 shows the appearance of SPA-1XCHOC48/DS3.

Table 1 shows the Quick Specs.

Type SPA-1XCHOC48/DS3 Cisco ASR 9000 Series & XR 12000 Shared Port Adapter
Product compatibility Cisco XR 12000 Series RoutersCisco ASR 9000 Series Router
Port density per SPA 1-port Channelized OC-48/STM-16
Physical interface (Channelized OC-48) OC-48c/STM-16 Small Form-Factor Pluggable (SFP) optics module (refer to optical parameters in Table 2)Visual status indicators (LEDs):• SPA status LED• Per-port LEDs• Carrier and alarm• Active and loopback
Protocols • IETF RFC 1490, Frame Relay Encapsulation• RFC 1662, Point-to-Point Protocol (PPP) in High-Level Data Link Control (HDLC)-like framing• Cisco HDLC• PPP, HDLC, and Frame Relay User Network Interface (UNI) encapsulations
Features and functions DS3• Full- and half-duplex connectivity at DS-3 rate (44.736 MHz)• Scrambling and subrate support of major data-service-unit (DSU) vendors• C-bit or M23 framing in DS-3 mode• G.751 or G.832 in E3 mode• Support for 16- and 32-bit cyclic redundancy check (CRC) (16-bit default)• 24-hour history maintained for error statistics and failure counts• DS-3 alarm and event detection (once-per-second polling)• Alarm indication signal (AIS)• Out of frame (OOF)• Far-end receive failure (FERF)
SONET errors, alarms, and performance monitoring Synchronization• Local (internal) or loop timed (recovered from network)• Pointer activity monitoringLocal (diagnostic) and line (network) loopbackPayload mapping• POS with 1 + X^43 self-synchronous scramblerSONET/SDH compliance• Telcordia (Bellcore) GR-253-CORE (as applicable)• ANSI T1.105, T1.231• ITU-T G.707, G.957, G.825 (as applicable)Supported SONET/SDH alarm and signal events• Signal failure bit error rate (SF-ber)• Signal degrade bit error rate (SD-ber)• Signal label payload construction (C2)• Path trace byte (J1)• Section• Loss of signal (LoS)• Loss of frame (LoF)• Error counts for B1• Threshold crossing alarms (TCA) for B1• Line• Line alarm indication signal (LAIS)• Line remote defect indication (LRDI)• Line remote error indication (LREI)• Error counts for B2• TCA for B2• Path• Path alarm indication signal (PAIS)• Path remote defect indication (PRDI)• Path remote error indication (PREI)• Error counts for B3• TCA for B3• Loss of pointer (LoP)• Positive stuffing event (PSE)Negative stuffing event (NSE)Path unequipped indication signal (PUNEQ)Path payload mismatch indication signal (PPLM)
Network management • SONET-MIB (RFC 3592)• SONET/SDH-MIB (RFC 2558)• CISCO-SONET-MIB• DS-3/E3-MIB (RFC 3896)• Simple Network Management Protocol (SNMP)
Reliability and availability • Online insertion and removal (OIR)• Field-replaceable SFP optical modules• 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols• Single SPA software reset
Physical specifications • Weight: 1.27 lb (0.57 kg)• Height: 1.56 in. (3.96 cm) (double height)• Width: 6.75 in. (17.15 cm)• Depth: 7.28 in. (18.49 cm)
Power • 1-port Channelized OC-48/STM-16 = 44W (with optics)
Environmental specifications • Operating temperature: 41 to 104°F (5 to 40°C)• Storage temperature: -38 to 150°F (-40 to 70°C)• Operating humidity: 5 to 85% relative humidity• Storage humidity: 5 to 95% relative humidity
Compliance and agency approvals Safety• UL/CSA 60950-1• IEC/EN 60950-1• AS/NZS 60950.1• EN60825/IEC60825 laser safety• 21CFR1040 -FDA Code of Federal Regulations (USA) laser safetyEMC• FCC Part 15 (CFR 47)• ICES 003• CISPR 22• AS/NZS CISPR22• VCCI• EN55022• EN55024• EN300 386• EN50082-1• EN61000-6-1Network Equipment Building Standards (NEBS)This product is designed to meet the following requirements (official qualification may be in progress):• SR-3580 – NEBS: Criteria levels (Level 3 compliant)• GR-63-CORE – NEBS: Physical Protection• GR-1089-CORE – NEBS: EMC and Safety

Get more information
Do you have any question about the SPA-1XCHOC48/DS3?
Contact us now via Live Chat or sales@metafinitivetech.com

Warrenty Description

100% Low Price Guarantee: Metafinitivetech.com provides high-quality products at low wholesale prices

100% Quality Assurance: All items are ORIGINAL and GENUINE only. Item conditions are “New Sealed” or “Used / Refurbished”. Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support: Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee: You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment: Verified authorization: Mcafee Secure, VeriSign Secured