CISCO7606= (USED)
CISCO7606= (USED) Original price was: $2,475.00.Current price is: $2,351.25.
Back to products

SPA-4XOC3-POS-V2

Original price was: $12,224.00.Current price is: $11,612.80.

Model: SPA-4XOC3-POS-V2 Cisco ASR 9000 Series Shared Port Adapter
Details: Cisco ASR 9000 Adapter SPA-4XOC3-POS-V2 4-port OC-3/STM-1 POS Shared Port Adapters
Condition: New Factory Sealed
Warranty: 3 Years Warranty.

SKU: SPA-4XOC3-POS-V2 Categories: , ,
Description

SPA-4XOC3-POS-V2 Overview

Quick Specs Figure 1 shows the appearance of SPA-4XOC3-POS-V2.

Table 1 shows the Quick Specs.

Product compatibility • Cisco 12000 Series Routers• Cisco XR 12000 Series Routers• Cisco ASR 1000 Series Router• Cisco ASR 9000 Series Router
Port density per SPA 4 ports
Physical interface • OC-3c/STM-1 SFP optics module (refer to optical parameters in Table 2)• Visual status indicators (LEDs):• SPA status LED• Per-port LEDs• Carrier and alarm• Active and loopback
Protocols • RFC 1662 PPP in High-Level Data Link Control (HDLC)-like framing• RFC 2615 Point-to-Point Protocol (PPP) over SONET/SDH• RFC 2427, Multiprotocol Interconnect over Frame Relay• IPv4/IPv6
Features and functions Synchronization• Local (internal) or loop timed (recovered from network)• Pointer activity monitoringLocal (diagnostic) and line (network) loopbackPayload mapping• POS with 1 + X^43 self-synchronous scramblerSONET/SDH compliance• Telcordia (Bellcore) GR-253-CORE (as applicable)• ANSI T1.105, T1.231• ITU-T G.707, G.957, G.825 (as applicable)Supported SONET/SDH alarm and signal events• Signal failure bit error rate (SF-ber)• Signal degrade bit error rate (SD-ber)• Signal label payload construction (C2)• Path trace byte (J1)• Section• Loss of signal (LoS)• Loss of frame (LoF)• Error counts for B1• Threshold crossing alarms (TCA) for B1• Line• Line alarm indication signal (LAIS)• Line remote defect indication (LRDI)• Line remote error indication (LREI)• Error counts for B2• TCA for B2• Path• Path alarm indication signal (PAIS)• Path remote defect indication (PRDI)• Path remote error indication (PREI)• Error counts for B3• TCA for B3• Loss of pointer (LoP)• Positive stuffing event (PSE)• Negative stuffing event (NSE)• Path unequipped indication signal (PUNEQ)• Path payload mismatch indication signal (PPLM)
Network management • RFC 2558 MIB (SONET/SDH)• Simple Network Management Protocol (SNMP)
Reliability and availability • Online insertion and removal (OIR)• Field-replaceable SFP optical modules• 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols• Single SPA software reset
Physical specifications • Weight: 0.75 lb (0.34 kg)• Height: 0.8 in. (2.03 cm) (single height)• Width: 6.75 in. (17.15 cm)• Depth: 7.28 in. (18.49 cm)
Power • 4-Port OC-3c/STM-1 = 6.0W (no optics)
Environmental specifications • Operating temperature: 41 to 104°F (5 to 40°C)• Storage temperature: -38 to 150°F (-40 to 70°C)• Operating humidity: 5 to 85% relative humidity• Storage humidity: 5 to 95% relative humidity
Compliance and agency approvals Safety• UL 60950• CSA 22.2-No.60950• EN60950• IEC 60950 CB Scheme• ACA TS001• AS/NZS 3260• EN60825IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1• 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1EMC• FCC Part 15 (CFR 47)• ICES 003• EN55022• CISPR 22• AS/NZS CISPR22• VCCI• EN55024• EN50082-1• EN61000-6-1• EN61000-3-2• EN61000-3-3Network Equipment Building System (NEBS)This product is designed to meet the following requirements (official qualification may be in progress):• SR-3580-NEBS: Criteria levels (Level 3 compliant)• GR-63-Core-NEBS: Physical protection• GR-1089-Core-NEBS: EMC and safetyETSI• EN300 386/EN300 386-2 Class B• ETS 300 019 Storage Class 1.1• ETS 300 019 Transportation Class 2.3• ETS 300 019 Stationary Use Class 3.1

Get more information
Do you have any question about the SPA-4XOC3-POS-V2?
Contact us now via Live Chat or sales@metafinitivetech.com

Warrenty Description

100% Low Price Guarantee: Metafinitivetech.com provides high-quality products at low wholesale prices

100% Quality Assurance: All items are ORIGINAL and GENUINE only. Item conditions are “New Sealed” or “Used / Refurbished”. Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support: Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee: You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment: Verified authorization: Mcafee Secure, VeriSign Secured