Back to products
7609S-RSP720C-P (USED)
7609S-RSP720C-P (USED) Original price was: $10,711.00.Current price is: $10,175.45.

SPA-1XCHSTM1/OC3

Original price was: $11,498.80.Current price is: $10,923.86.

Model: SPA-1XCHSTM1/OC3 Cisco ASR 9000 Series Shared Port Adapter
Details: Cisco ASR 9000 Adapter SPA-1XCHSTM1/OC3 1-port Channelized STM-1/OC-3c to DS0 Shared Port Adapter
Condition: New Factory Sealed
Warranty: 3 Years Warranty.

SKU: SPA-1XCHSTM1/OC3 Categories: , ,
Description

SPA-1XCHSTM1/OC3 Overview

Quick Specs Figure 1 shows the appearance of SPA-1XCHSTM1/OC3.

Table 1 shows the Quick Specs.

Product compatibility · Cisco 7600 Series Routers· Cisco ASR 1000 Series Routers· Cisco ASR 9000 Series Routers
Minimum software version · Cisco 7600 Series Routers: Cisco IOS® Software Release 15.4(2)S and Cisco IOS XE Software Release 3.12.0.0S· Cisco ASR 1000 Series Routers with Cisco IOS XE Software Releases 3.12.0,3.11.2, and 3.10.3· Cisco ASR 9000 Series Routers with Cisco IOS XR Software Release 5.2.0
Protocols Serial encapsulations:· High-Level Data Link Control (HDLC)· Point-to-Point Protocol (PPP), RFC 1662· Frame Relay, RFC 1490Multilink support (bundle limit dependent on number of links per bundle; maximum of 12 links per bundle):· Multilink PPP (MLPPP), RFC 1990· Link fragmentation and interleaving (LFI) over Frame Relay (FRF.12) and MLPPPNetworking protocols:· IPv4/IPv6
Cards, ports, and slots 1 port
Connectivity OC-3/STM-1 Small Form-Factor Pluggable (SFP) optics module (refer to optical parameters in Table 2)
Features and functions Up to 84 T1 (or 3 T3) or 63 E1 (or 3 E3) portsUp to 1022 n x DS-0 channels (where n is 1 to 24) with no T3 ports configuredUp to 400 n x DS-0 channels (where n is 1 to 24) with one or more T3 ports configuredSupport for Channelized OC-3 to T1, Channelized STM-1 to E1, clear channel T3/E3, subrate T3/E3, full-rate T1, clear channel E1, and Channelized T1/E1SONET multiplexing:· OC-3 <-> STS-3 <-> STS-1 <-> VTG <-> VT1.5 <-> T1 <-> N x DS-0· OC-3 <-> STS-3 <-> STS-1 <-> T3 <-> T1 <-> N x DS-0· OC-3 <-> STS-3 <-> STS-1 <-> T3· OC-3 <-> STS-3 <-> STS-1 <-> T3 <-> E1 <-> n x DS-0SDH multiplexing:· STM-1 <-> AUG <-> AU-4 <-> VC-4 <-> TUG-3 <-> TUG-2 <-> TU-12 <-> VC-12 <-> E1 <-> n x DS-0· STM-1 <-> AUG <-> AU-4 <-> VC-4 <-> TUG-3 <-> TU-3 <-> VC-3 <-> T3/E3· Internal or line-derived (loop) clocking, independently selectable on each T1 or E1 tributaryLoopback capabilities:· Local and remote loopback at the T3/T1 level· Network loopback at the STM-1/OC-3, T3/E3, and T1/E1 levels· Response to embedded loopback commands· Insertion of loopback commands into transmitted signal· Bit error rate testing (BERT) pattern generation and detection per channel· Programmable pseudorandom pattern up to 32 bits in length· T3/E3: All 0s, all 1s, 215, 220, 220 QRSS, 223, alternating 0s and 1s, 1-in-8, and 3-in-24· T1/E1: All 0s, all 1s, 211, 215, 220, 220 QRSS, 223, alternating 0s and 1s, 1-in-8, and 3-in-24· 32-bit error-count and bit-count registers· Detection of test patterns with bit error rates up to 10-2· 24-hour history maintained for error statistics and failure counts, at 15-minute intervals· 16- and 32-bit cyclic redundancy check (CRC); 16-bit defaultSONET/SDH-specific features:· Compliance with G.707, G.783, G.784, G.957, G.958, and GR-253· Supported SONET/SDH alarm and signal events:◦   Signal failure bit error rate (SF-BER)◦   Signal degrade bit error rate (SD-BER)◦   Signal label payload construction (C2)◦   Path trace byte (J1)· Section◦   Loss of signal (LoS)◦   Loss of frame (LoF)◦   Error counts for B1Line· Line alarm indication signal (LAIS)· Line remote defect indication (LRDI)· Line remote error indication (LREI)· Error counts for B2
Reliability and availability OIRField-replaceable SFP optics modulesSupport for both 1 + 1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocolsSingle SPA software reset
MIBs RFC 2558 MIB (SONET/SDH)RFC 2495 MIB (T1/E1)RFC 2496 MIB (T3/E3)
Network management Simple Network Management Protocol (SNMP)
Physical specifications Weight: 0.75 lb (0.34 kg)Height: 0.8 in. (2.03 cm)Width: 6.75 in. (17.15 cm)Depth: 7.28 in. (18.49 cm)
Regulatory compliance CE markingSafety: UL/CSA/IEC/EN 60950-1, IEC/EN 60825 Laser Safety, AS/NZS 60950, FDA Code of Federal Regulations Laser SafetyEMC: FCC Part 15 Class A, ICES 003 Class A, AS/NZS 3548 Class A, CISPR 22 Class B (up to 1GHz), EN55022 Class B (up to 1GHz), VCCI Class A, BSMI Class A, EN 300 386 Telecommunications Network Equipment (EMC), EN50082-1/EN61000-6-1 Generic Immunity Standard, EN55022 Information Technology Equipment (Emissions), EN55024 Information Technology Equipment (Immunity), IEC/EN61000-3-2 Power Line Harmonics, IEC/EN61000-3-3 Voltage Fluctuations and Flicker, IEC/EN61000-4-2 Electrostatic Discharge Immunity (8kV contact, 15kV air), IEC/EN61000-4-3 Radiated Immunity (10V/m), IEC/EN61000-4-4 Electrical Fast Transient Immunity (2kV power, 1kV signal), IEC/EN61000-4-5 Surge AC Port (4kV CM, 2kV DM), IEC/EN61000-4-5 Surge Signal Port (1kV), IEC/EN61000-4-5 Surge DC Port (1kV), IEC/EN61000-4-6 Immunity to Conducted Disturbances (10Vrms), IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30A/m), IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations, GR-1089-CORE NEBS EMC and Safety, GR-63-CORE NEBS Physical Protection, SR-3580 NEBS Criteria Levels (Level 3)Telecom (OC3): GR-253Telecom (STM-1): G.783, G.957
Environmental Specifications Operating temperature: 41 to 104°F (5 to 40°C)Storage temperature: -38 to 150°F (-40 to 70°C)Operating humidity: 5 to 85% relative humidityStorage humidity: 5 to 95% relative humidity

Get more information
Do you have any question about the SPA-1XCHSTM1/OC3?
Contact us now via Live Chat or sales@metafinitivetech.com

Warrenty Description

100% Low Price Guarantee: Metafinitivetech.com provides high-quality products at low wholesale prices

100% Quality Assurance: All items are ORIGINAL and GENUINE only. Item conditions are “New Sealed” or “Used / Refurbished”. Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support: Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee: You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment: Verified authorization: Mcafee Secure, VeriSign Secured