CISCO2911/K9
CISCO2911/K9 Original price was: $3,737.00.Current price is: $3,550.15.
Back to products
A9K-2T20GE-L
A9K-2T20GE-L Original price was: $19,665.00.Current price is: $18,681.75.

SPA-4XCT3/DS0

Original price was: $19,164.95.Current price is: $18,206.70.

Model: SPA-4XCT3/DS0 Cisco ASR 9000 Series Shared Port Adapter
Details: Cisco ASR 9000 Adapter SPA-4XCT3/DS0 4-port Channelized T3 to DS0 Shared Port Adapter
Condition: New Factory Sealed
Warranty: 3 Years Warranty.

SKU: SPA-4XCT3/DS0 Categories: , ,
Description

SPA-4XCT3/DS0 Overview

Quick Specs Figure 1 shows the appearance of SPA-4XCT3/DS0.

Table 1 shows the Quick Specs.

Product compatibility · Cisco 7600 Series Routers· Cisco ASR 1000 Series Aggregation Services Routers· Cisco ASR 9000 Series Routers (4-port only)
Minimum software version · Cisco 7600 Series Routers with Cisco IOS® Software Release 15.4(2)S and Cisco IOS XE Software Release 3.12.0.0S· Cisco ASR 1000 Series Router with Cisco IOS XE Software Release 3.12.0, 3.11.2, or 3.10.3· Cisco ASR 9000 Series Router with Cisco IOS XR Software Release 5.2.0
Port density per SPA 4-port
Physical interface · 1.0 and 2.3 RF connectors (75-ohm impedance)· 1.0 and 2.3 RF-to-BNC adapter cable option
Protocols Serial encapsulations:· High-Level Data Link Control (HDLC)· Point-to-Point Protocol (PPP), RFC 1662· Frame Relay, RFC 1490Multilink support (bundle limit dependent on number of links per bundle; maximum 12 T1 links per bundle)MLPPP, RFC 1990MLFR, FRF.16LFI over Frame Relay (FRF.12) and MLPPP
Features and functions Up to 4 T3 ports· Up to 112 T1 ports (28 T1 multiplexed onto a single T3)· Up to 1024 n x DS-0 channels (where n is 1 to 24) with no T3 configured· Up to 400 n x DS-0 channels (where n is 1 to 24) with one or more T3 configured· Support for full-rate (clear channel) T3, Channelized T3 to T1, full-rate T1, Channelized T1, and fractional T1· Integrated DSUs· Internal or line-derived (loop) clocking selectable on each T3 or T1· Loopback capabilities:◦   Local and remote loopback at the T3 and T1 levels◦   Response to embedded loopback commands◦   Insertion of loopback commands into transmitted signal· Bit-error-rate-testing (BERT) pattern generation and detection per channel◦   Programmable pseudorandom pattern up to 32 bits long· T3: All 0s, all 1s, 215, 220, 220 Quasi-Random Signal Sequence (QRSS), 223, alternating 0s and 1s, 1-in-8, and 3-in-24· T1: All 0s, all 1s, 211, 215, 220, 220 QRSS, 223, alternating 0s and 1s, 1-in-8, and 3-in-24◦   32-bit error-count and bit-count registers◦   Fully independent transmit and receive sections◦   Detection of test patterns with bit error rates up to 10-2· 24-hour history maintained for error statistics and failure counts, at 15-minute intervals· 16- and 32-bit cyclic redundancy check (CRC); 16-bit default
T1-specific features · Full-duplex connectivity at T1 rate (1.536 MHz)· D4 Super Frame (SF) or Extended Super Frame (ESF) framing· ANSI T1.403 and AT&T TR 54016 Facility Data Link (FDL) support· Alarm monitoring:◦   Alarm indication signal (AIS)◦   Out of frame (OOF)◦   Far-end alarm failure (yellow or distant alarm)· Performance data collection:◦   CRC and bit errors◦   Framing bit errors (FERR)◦   Line errored seconds◦   Far-end errored seconds◦   Far-end severely errored seconds◦   Far-end unavailable seconds
T3-specific features · Full-duplex connectivity at T3 rate (44.736 MHz)· C-Bit or M23 framing· Subrate and scrambling support of Quick Eagle Networks (formerly Digital Link), Larscom, ADC Kentrox, Adtran, and Verilink DSUs· Binary 3-zero substitution (B3ZS) line coding· Maintenance data link (MDL)· T3 far-end alarm and control (FEAC) channel support· Line build-out up to 450 ft (135m)· Alarm monitoring:◦   AIS◦   OOF◦   Loss of signal (LOS)◦   Far-end receive failure (FERF)· Performance data collection:◦   Line coding violation (LCV)◦   Framing bit errors (FERR) (F- or M-bit errors)◦   P-bit error counts (path-parity errors)◦   C-bit error counts◦   Far-end block error (FEBE) counts
Reliability and availability · OIR· Single SPA software reset
MIBs · RFC 2495 MIB (DS-1/E1 MIB)· RFC 2496 MIB (DS-3 MIB)
Network management Simple Network Management Protocol (SNMP)
Physical specifications · Weight: 0.75 lb (0.34 kg)· Height: 0.8 in. (2.03 cm) (single height)· Width: 6.75 in. (17.15 cm)· Depth: 7.28 in. (18.49 cm)
Power · 2-port: 11.3W maximum· 4-port: 13.2W maximum
Environmental specifications · Operating temperature: 41 to 104°F (5 to 40°C)· Storage temperature: –38 to 150°F (–40 to 70°C)· Operating humidity: 5 to 85% relative humidity· Storage humidity: 5 to 95% relative humidity
Compliance and agency approvals CE MarkingSafety· UL 60950· CSA 22.2 No.60950· IEC 60950· EN 60950· AS/NZS 3260· TS001EMC· CFR47 Part 15· ICES 003· EN55022· CISPR 22· AS/NZ 3548· VCCI· EN55024· EN50082-1· EN61000-6-1Telecom (T3)· ANSI T1 107· T1 404· AT&T 54014· ANSI T1.231Telecom (T1)· ANSI T1.403· AT&T 54016

Get more information
Do you have any question about the SPA-4XCT3/DS0?
Contact us now via Live Chat or sales@metafinitivetech.com

Warrenty Description

100% Low Price Guarantee: Metafinitivetech.com provides high-quality products at low wholesale prices

100% Quality Assurance: All items are ORIGINAL and GENUINE only. Item conditions are “New Sealed” or “Used / Refurbished”. Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support: Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee: You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment: Verified authorization: Mcafee Secure, VeriSign Secured