-5%
A9K-MOD80-SE
Model: A9K-MOD80-SE Cisco ASR 9000 Ethernet Linecard
Details: Cisco ASR 9000 Series Router Ethernet Linecard A9K-MOD80-SE 80G Modular Linecard, Service Edge Optimized (spare)
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
A9K-MOD80-SE Overview
Quick Specs Figure 1 shows the appearance of A9K-MOD80-SE.
Table 1 shows the Quick Specs.
| Type | ASR 9000 Mod80 Modular Line Card, Service Edge Optimized, requires modular port adapters |
| Physical Dimensions | 14.5 W x 1.72 H x 22.40 L14.5 W x 1.72 H x 24.25 L (including ejector levers) |
| Weight | 17.5 lbs. (est.) (7.93 Kg) |
| Chassis compatibility | Compatible with the Cisco ASR 9922, 9010, 9006 and 9001 systems |
| Port density | Up to 2 modular port adapters are supported per line card. |
| Ethernet | · IEEE 802.3 compliant· 10 Gigabit Ethernet PHY monitoring· IEEE 802.x flow control· Full-duplex operation· Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets |
| Card density | Maximum number of line cards per system: Cisco ASR 9922 = 20, Cisco ASR 9010 = 8, and Cisco ASR 9006 = 4 |
| Options | Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet TransportOptimized (basic QoS) line card. |
| Reliability and availability | Line card online insertion and removal (OIR) support without system impact |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9000 Series Routers are designed to meet:· SR-3580: NEBS Criteria Levels (Level 3)· GR-1089-CORE: NEBS EMC and Safety· GR-63-CORE: NEBS Physical Protection |
| Operating temperature (nominal) | 41 to 104ºF (5 to 40ºC) |
| Operating temperature (short-term) | 23 to 131ºF (–5 to 55ºC) |
| Operating humidity (nominal) relative humidity | 10 to 85% |
| Storage temperature | –40 to 158ºF (–40 to 70ºC) |
| Storage relative humidity | 5 to 95%Note: Not to exceed 0.024 kg of water per kg of dry air |
| Operating altitude | –60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) |
| ETSI standards | Cisco ASR 9000 Series Routers are designed to meet:· EN300 386: Telecommunications Network Equipment (EMC)· ETSI 300 019 Storage Class 1.1· ETSI 300 019 Transportation Class 2.3· ETSI 300 019 Stationary Use Class 3.1· EN55022: Information Technology Equipment (Emissions)· EN55024: Information Technology Equipment (Immunity)· EN50082-1/EN-61000-6-1: Generic Immunity Standard |
| EMC standards | Cisco ASR 9000 Series Routers are designed to meet:· FCC Class A· ICES 003 Class A· AS/NZS 3548 Class A· CISPR 22 (EN55022) Class A· VCCI Class A· BSMI Class A· IEC/EN 61000-3-2: Power Line Harmonics· IEC/EN 61000-3-3: Voltage Fluctuations and Flicker |
| Immunity | Cisco ASR 9000 Series Routers are designed to meet:· IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)· IEC/EN-61000-4-3: Radiated Immunity (10V/m)· IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)· IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)· IEC/EN-61000-4-5: Signal Ports (1kV)· IEC/EN-61000-4-5: Surge DC Port (1kV)· IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)· IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)· IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations |
| Safety | Cisco ASR 9000 Series Routers are designed to meet:· UL/CSA/IEC/EN 60950-1· IEC/EN 60825 Laser Safety· ACA TS001· AS/NZS 60950· FDA: Code of Federal Regulations Laser Safety |
Get more information
Do you have any question about the A9K-MOD80-SE?
Contact us now via Live Chat or sales@metafinitivetech.com
