-5%
S5700-28TP-LI-AC
Model: S5700-28TP-LI-AC Huawei S5700 Series Switch
Details: S5700-28TP-LI-AC(24 Ethernet 10/100/1000ports,2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,AC 110/220V)
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
S5700-28TP-LI-AC Overview
Quick Specs Figure 1 shows the appearance of S5700-28TP-LI-AC.
Table 1 shows the Quick Specs.
| Fixed Ports | S5700-28TP-LI-AC/S5700-28TP-PWR-LI-AC/S5701-28TP-PWR-LI-AC: 24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports, 2 x Combo 10/100/1,000 Base-T Ethernet ports |
| MAC Address Table | 16K MAC address entries MAC address learning and agingStatic, dynamic, and blackholeMAC address entriesPacket filtering based on source MAC addressesInterface-based MAC learning limiting |
| VLAN Features | 4K VLANsGuest VLAN and voice VLANGVRPMUX VLANVLAN assignment based on MAC addresses, protocols, IP subnets, policies, and interfaces1:1 and N:1 VLAN mapping |
| Jumbo frame | 10K |
| Reliability | RRPP ring topology and RRPP multi-instanceSmart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchoverSEPERPS (G.8032)STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)BPDU protection, root protection, and loop protectionBPDU tunnel |
| IP Routing | Static route, RIP, RIPng (S5700-10P-LI-AC/S5700-10P-PWR-LI-AC do not support RIPng) |
| IPv6 Features | Neighbor Discovery (ND)Path MTU (PMTU)IPv6 ping, IPv6 tracert, and IPv6 TelnetACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, and protocol typeMLD v1/v2 snooping |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leaveMulticast forwarding in a VLAN and multicast replication between VLANsMulticast load balancing among member ports of a trunkControllable multicastInterface-based multicast traffic statistics |
| QoS/ACL | Rate limiting on packets sent and received by an interfacePacket redirectionInterface-based traffic policing and two-rate and three-color CAREight queues on each interfaceWRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithmsRe-marking of the 802.1p priority and DSCP priorityPacket filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN IDRate limiting in each queue and traffic shaping on interfaces |
| Security | Hierarchical user management and password protectionDoS attack defense, ARP attack defense, and ICMP attack defenseBinding of the IP address, MAC address, interface number, and VLAN IDPort isolation, port security, and sticky MACMFFBlackhole MAC address entriesLimit on the number of learned MAC addresses IEEE802.1x authentication and limit on the number of users on an interfaceAAA authentication, RADIUS authentication, HWTACACS+ authentication, and NACSSH V2.0Hypertext Transfer Protocol Secure (HTTPS)CPU defenseBlacklist and whitelist |
| Access Security | DHCP relay, DHCP server, DHCP snooping, and DHCP security |
| Lightning Protection | Service interface: 6 kV |
| Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configurationAutomatically loading the system software package and patches of clients One-click and automatic delivery of service configurationsSupports independent running client |
| Management and Maintenance | iStack (excluding S5700-10P-LI-AC, S5700-10P-PWR-LI-AC, S5700S-28P-LI-AC, S5700S-52P-LI-AC and battery LAN switches)Virtual Cable Test (VCT)Remote configuration and maintenance using TelnetSNMP v1/v2c/v3RMONeSight and web-based NMSHTTPSLLDP/LLDP-MEDSystem logs and multi-level alarms802.3az EEEDying Gasp (excluding battery LAN switches)Device hibernation mode (excluding PWR serials switches, battery LAN switches, S5700-10P-LI, S5700-28X-LI-24S, S5701-28X-LI-24S-AC and S5700-52X-LI-48CS-AC) |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST)Supports LNP (Similar to DTP)Supports VCMP (Similar to VTP) |
| Operating Environment | Long-term operating temperature: 0°C to 50°CRelative humidity: 5% to 95% (non-condensing) |
| Input Voltage | AC:Â Rated voltage range: 100V to 240V, 50 Hz/60 Hz, Maximum voltage range: 90V to 264V, 47 Hz/63 Hz |
| Power Socket Position | rear power sockets |
| Battery | One slot for lead-acid battery charger module (supported by battery LAN switches) |
| Dimensions (W x D x H) | 442 mm x 220 mm x 43.6 mm |
| Power Consumption | S5700-28TP-LI-AC < 26.4W |
Get more information
Do you have any question about the S5700-28TP-LI-AC?
Contact us now via Live Chat or sales@metafinitivetech.com
