-5%
S3700-28TP-PWR-SI
Model: S3700-28TP-PWR-SI Huawei S3700 Series Switch
Details: S3700-28TP-PWR-SI(24 Ethernet 10/100 PoE+ ports,2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,with 500W AC power supply)
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
S3700-28TP-PWR-SI Overview
Quick Specs Figure 1 shows the appearance of S3700-28TP-PWR-SI.
Table 1 shows the Quick Specs.
| Ports description | 24*10/100Base-TX |
| MAC address table | IEEE 802.1d compliance16K MAC address entriesMAC address learning and agingStatic, dynamic, and blackhole MAC address entriesPacket filtering based on source MAC addresses |
| VLAN | 4K VLANsGuest VLANs, voice VLAN, and super VLANMUX VLAN and GVRPVLAN assignment based on MAC addresses, protocols, and IP subnetsQinQSelective QinQ1:1 VLAN mappingN:1 VLAN mapping |
| Reliability | RRPP (ring topology, intersecting rings, and multi-instance), implementing protection switchover within 50 msSmart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchoverSTP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)BPDU protection, root protection, and loop protectionSmart Ethernet Protection (SEP) |
| IP routing | Static routing, RIPv1, RIPv2, and ECMP |
| IPv6 features | Neighbor Discovery (ND)Path MTU (PMTU)IPv6 ping, IPv6 tracert, and IPv6 TelnetManually configured tunnel6to4 tunnelISATAP tunnelACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol typeMLD v1/v2 snooping |
| Multicast | 1 K multicast groupsIGMP v1/v2/v3 snooping and IGMP fast leaveMulticast VLAN and multicast replication between VLANsMulticast load balancing among member ports of a trunkControllable multicastPort-based multicast traffic statistics |
| QoS/ACL | Rate limiting on packets sent and received by an interfacePacket redirectionPort-based traffic policing and two-rate three-color CAREight queues on each portWRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithmsRe-marking of the 802.1p priority and DSCP priorityPacket filtering on Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN IDRate limiting in each queue and traffic shaping on ports |
| Security | User privilege management and password protectionDoS attack defense, ARP attack defense, and ICMP attack defenseBinding of the IP address, MAC address, interface, and VLANPort isolation, port security, and sticky MACBlackhole MAC address entriesLimit on the number of learned MAC addresses802.1x authentication and limit on the number of users on an interfaceAAA authentication, RADIUS authentication, HWTACACS authentication, and NACSSH v2.0CPU defenseBlacklist and whitelist |
| Surge protection | 6KV surge protection capability on service ports (1KV on service ports on PoE devices) |
| Management and maintenance | iStackMAC Forced Forwarding (MFF)Remote configuration and maintenance using TelnetAuto-ConfigVirtual cable testEthernet OAM (IEEE 802.3ah and 802.1ag)Dying gasp power-off alarm (S3700-28TP-EI-MC-AC)SNMP v1/v2c/v3 and RMONWeb NMS |
| Operating environment | Operating temperature: 0℃–50℃(long term);Relative humidity: 10%–90% (non-condensing) |
| Power supply | AC:Rated voltage range: 100V to 240V AC; 50/60 HzMaximum voltage range: 90V to 264V AC; 50/60 HzDC:Rated voltage range: –48V to –60V DCMaximum voltage range: –36V to –72V DCNote: PoE-support switches do not use DC power supplies. |
| Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
| Weight | S3700-28TP-PWR-SI<4Kg(without power supply) |
| Power consumption | S3700-28TP-PWR-SI<818W(PoE: 740W) |
Get more information
Do you have any question about the S3700-28TP-PWR-SI?
Contact us now via Live Chat or sales@metafinitivetech.com
