-5%
CE5810-24T4S-EI
Model: CE5810-24T4S-EI Huawei CE5800 Series Data Center Switch
Details: CE5810-24T4S-EI Switch(24-Port GE RJ45,4-Port 10GE SFP+,Without Fan and Power Module)
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
CE5810-24T4S-EI Overview
Quick Specs Figure 1 shows the appearance of CE5810-24T4S-EI.
Table 1 shows the Quick Specs.
| Base-T Ports | 24 |
| SFP+ Ports | 4 |
| QSFP+ Ports | – |
| Switching Capacity | 128 Gbit/s |
| Forwarding Rates | 96 Mpps |
| Airflow Design | Front-to-back or back-to-front |
| Device Virtualization | iStack |
| Network Virtualization | M-LAG |
| VM Awareness | Agile Controller |
| SDN | Open Programmability System (OPS) |
| Traffic Analysis | NetStream |
| VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
| ACL | ingress: 2.25kegress: 512 |
| MAC Address Table | maximum: 32k |
| ARP (maximum) | 8k |
| IPv4 FIB (maximum) | 12k |
| IP Routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
| IPv6 FIB (maximum) | 6k |
| IPv6 | IPv6 Neighbor Discovery (ND)Â (not supported by CE5855) |
| Multicast FIB (maximum) | 8k |
| Multicast | IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
| Reliability | LACP |
| QoS | Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
| Configuration and Maintenance | Console, Telnet, and SSH terminals |
| Security and Management | 802.1x authentication |
| Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
| Weight (fully loaded) | 8 kg (17.6 lb) |
| Environmental Parameters | Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
| Operating Voltage | AC: 90V to 290V |
| Maximum Power Consumption | 68W |
Get more information
Do you have any question about the CE5810-24T4S-EI?
Contact us now via Live Chat or sales@metafinitivetech.com
