-5%
NIM-1MFT-T1/E1
Model: Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module NIM-1MFT-T1/E1
Details: Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module NIM-1MFT-T1/E1
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
NIM-1MFT-T1/E1 Overview
Quick Specs Figure 1 shows the appearance of NIM-1MFT-T1/E1.
Table 1 shows the Quick Specs.
| Serial data (channel-group) | 2 per port |
| E1 unframed G.703 | Not supported |
| Voice channel associated signaling (CAS) (ds0-group) | 24 per port (T1)31 per port (E1)1 per timeslot |
| PRI (pri-group) | 1 per port |
| Drop and insert(tdm-group) | 24 per port (T1)31 per port (E1)1 per timeslot |
| Transmit bit rate | 2.048 Mbps ±100 bps/50 ppm |
| Receive bit rate | 2.048 Mbps ±100 bps/50 ppm |
| Line code | Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS) |
| AMI ones density | Enforced for n x 56-kbps channels |
| Framing format | D4 (Super Frame [SF]) and Extended Super Frame (ESF) |
| Output level (line build-out [LBO]) | 0, -7.5 or -15 dB |
| Input level | +1 dB0 down to -24 dB0 |
| Data-terminal-equipment (DTE) interface (WIC mode) | Fractional service |
| DTE interface (VIC mode) | G.704 or structured |
| Data-communications-equipment (DCE) interface | G.704 or structured |
| Data rate | 1.984 Mbps (framed mode) per E1 port |
| Clocking | Internal and loop (recovered from network) |
| E1 national bits | Fixed (nonconfigurable) |
| Encoding | High-density bipolar three (HDB3) |
| DTE interface (WIC mode) | Fractional service |
| DCE interface | G.704 or structured |
| Dimensions (H x W x D) | 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm) |
| Environmental | ● Operating temperature: 0 to 50°C (32 to 122°F)● Storage temperature: -20 to +65°C (-4 to 148°F)● Relative humidity: 10 to 85% noncondensing operating; 5 to 95% noncondensing, nonoperating |
| T1 Compliance (partial list) | ● TIA-968-A● CS-03● Jate● ANSI T1.403 |
| E1 Compliance (partial list) | ● TBR4, TBR12, and TBR13● ITU-T G.703, G.704, G.823, and I.431● S016 (Australia) |
| Weight | 0.40 lb (181g) |
Get more information
Do you have any question about the NIM-1MFT-T1/E1?
Contact us now via Live Chat or sales@metafinitivetech.com
