CISCO7606= (USED) Original price was: $2,475.00.Current price is: $2,351.25.
Back to products

ASR-9006-DC

$4,207.50

Model: ASR-9006-DC Cisco ASR 9006 Series Chassis
Details: Cisco ASR 9006 ChassisASR-9006-DCASR-9006 DC Chassis
Condition: New Factory Sealed
Warranty: 3 Years Warranty.

SKU: ASR-9006-DC Categories: , ,
Description

ASR-9006-DC Overview

Quick Specs Figure 1 shows the appearance of ASR-9006-DC.

Table 1 shows the Quick Specs.

Description Cisco ASR 9006 Chassis, ASR-9006-DC, ASR-9006 DC Chassis
Physical specifications Height: 17.50 in. (444.5 mm) (10 RU)Width: 17.38 in. (441.45 mm)Depth:· With doors: 29.05 in. (737.9 mm)· Without doors: 29.05 in. (737.9 mm)Weight:· 89.55 lb (40.7 kg) (chassis with PEM)150 lb (65.91 kg) (fully loaded, excluding line cards and power modules) – RSP, two v2 FAN trays, PEMs
Slot orientation Horizontal
Cisco ASR 9000 Series RSP Dual redundant RSPs with integrated fabric in 2 slots
Cisco ASR 9000 Series line cards 4 line-card slots
“Commons” components 2 RSPs2 fan trays1 PEM (either DC or AC)1 fan filter
Reliability and availability Fabric redundancyFan redundancyFeed redundancyPower-supply redundancyRSP redundancySoftware redundancy
Rack mounting 19-in. default21- and 23-in. adapters availableNote: Minimum 17.75-in. opening between posts is needed for proper operation
Cabinet mounting YesNote: Doors not recommended in enclosed cabinets
Wall mounting No
Airflow Right-to-back, Front-to-back with baffle
Fabric One per RSP:· Active/active nonblocking operation mode in dual-RSP redundant configuration· Fully redundant in dual-RSP redundant configuration· Built-in service-intelligence and traffic-prioritization capability
Thermal Two fan trays:· 6 high-efficiency fans per tray· Variable-speed fans for optimal thermal performance· No single point of failure
Modularity Pay-as-you-grow power for future scalability, available in AC and DC.Multiple power module types:· 3 kW AC power module· 2.1 kW DC power moduleNote: Mixing of AC and DC modules is not supported
Redundancy · AC: N+N redundancy· DC: N+1 redundancy· Power module redundancy· A/B Feed redundancy
Power zones No power zone restrictionsFully load-sharing power infrastructure
Power input Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)
Power-module airflow Front-to-back
Operating temperature (nominal) 41 to 104ºF (5 to 40ºC)
Operating temperature (short-term) ASR 9006: 23 to 131ºF (-5 to 55ºC)ASR 9010: 23 to 122ºF (-5 to 50ºC)
Operating humidity (nominal) (relative humidity) 5 to 90%
Storage temperature -40 to 158ºF (-40 to 70ºC)
Storage (relative humidity) 5 to 93%
Operating altitude -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)
Network Equipment Building Standards (NEBS) Cisco ASR 9006 is designed to meet:· SR-3580: NEBS Criteria Levels (Level 3)· GR-1089-CORE: NEBS EMC and Safety· GR-63-CORE: NEBS Physical Protection· VZ.TPR.9205: Verizon TEEER
ETSI standards Cisco ASR 9006 is designed to meet:· EN300 386: Telecommunications Network Equipment (EMC)· ETSI 300 019 Storage Class 1.1· ETSI 300 019 Transportation Class 2.3· ETSI 300 019 Stationary Use Class 3.1
EMC standards emission Cisco ASR 9006 is designed to meet:· FCC Class 47CFR15 A· ICES 003 Class A· AS/NZS CISRP22 Class A· CISPR 22 (EN55022) Class A· VCCI Class A· BSMI Class A· IEC/EN 61000-3-12: Power Line Harmonics· IEC/EN 61000-3-11: Voltage Fluctuations and Flicker· EN55022: Information Technology Equipment (Emissions)· EN 50121-4: Railway EMC
EMC standards immunity Cisco ASR 9006 is designed to meet:· IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)· IEC/EN-61000-4-3: Radiated Immunity (10V/m)· IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)· IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)· IEC/EN-61000-4-5: Signal Surge Ports (1kV)· IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)· IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)· IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)· IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations· EN55024: Information Technology Equipment (Immunity)· EN50082-1/EN-61000-6-1: Generic Immunity Standard· EN 50121-4: Railway EMC
Safety Cisco ASR 9006 is designed to meet:· UL/CSA/IEC/EN 60950-1· IEC/EN 60825 Laser Safety· ACA TS001· AS/NZS 60950· FDA Code of Federal Regulations Laser Safety

Get more information
Do you have any question about the ASR-9006-DC?
Contact us now via Live Chat or sales@metafinitivetech.com

Warrenty Description

100% Low Price Guarantee: Metafinitivetech.com provides high-quality products at low wholesale prices

100% Quality Assurance: All items are ORIGINAL and GENUINE only. Item conditions are “New Sealed” or “Used / Refurbished”. Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support: Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee: You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment: Verified authorization: Mcafee Secure, VeriSign Secured