-5%
N5K-C5672UP
Model: N5K-C5672UP – Cisco Nexus 5000 Series Switch
Details: Nexus 5672UP Chassis, 1RU, 32 p 10-Gbps SFP+, 16 Unified Ports, 6p 40G QSFP+
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
N5K-C5672UP Overview
Quick Specs Figure 1 shows the appearance of N5K-C5672UP.
Table 1 shows the Quick Specs.
| Form factor | 1-rack unit |
| Number of ports | Up to 1152 with FEX |
| 10 GE | 48 ports |
| 40 GE | 6 true QSFP ports |
| Unified ports | 16 ports (Ethernet; FCoE; 2/4/8-gigabit FC) |
| 10 and 40 Gbps FCoE | Yes |
| Hardware VXLAN | Yes |
| NVGRE capable | Yes |
| Latency | 1 microsecond |
| Performance | ● Layer 2 and 3 hardware forwarding at 1.44 Tbps; 1071 mpps (64-byte packets)● Support for up to 256,000 combined entries of MAC addresses and Address Resolution Protocol (ARP) entries● Low latency of approximately 1 microsecond using cut-through forwarding for predictable, consistent traffic latency regardless of packet size, traffic pattern, or features enabled on 10 and 40 Gigabit Ethernet interfaces● 25-MB buffer per 12 x 10 Gigabit Ethernet SFP+ interfaces● Line-rate traffic throughput on all ports in Layer 2 and 3 mode |
| Interfaces | ● 48 fixed 1/10 Gigabit Ethernet SFP+ ports with 16 of the 48 ports being unified, and 6 fixed 40 Gigabit Ethernet QSFP+ ports with 10 and 40 Gigabit Ethernet FCoE support on all respective ports and 2/4/8-Gbps Fibre Channel on all the unified ports● Expansion module: 24 SFP+ unified ports plus 2 x 40 Gigabit Ethernet QSFP+ ports● Conversion of 40 Gigabit Ethernet ports to 10 Gigabit Ethernet interfaces through QSFP+ breakout cable● Fabric extension through the Cisco Nexus 2200 and 2300 platforms |
| Layer 2 Features | ● Layer 2 switch ports and VLAN trunks● IEEE 802.1Q VLAN encapsulation● Support for up to 4000 VLANs● Support for up to 4000 access control list (ACL) entries● Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible)● Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s): 64 instances● Spanning Tree PortFast● Spanning Tree root guard● Spanning Tree Bridge Assurance● Cisco EtherChannel technology (up to 16 ports per EtherChannel)● Cisco vPC technology● vPC configuration synchronization● vPC shutdown● Link Aggregation Control Protocol (LACP): IEEE 802.3ad● Advanced port-channel hashing based on Layer 2, 3, and 4 information● Jumbo frames on all ports (up to 9216 bytes)● Pause frames (IEEE 802.3x)● Storm control (unicast, multicast, and broadcast)● Private VLANs● Private VLAN over trunks (isolated and promiscuous)● Private VLANs over vPC and EtherChannels● VLAN remapping● FabricPath● EvPC and vPC+ with FabricPath● Adapter FEX● Data Center VM-FEX● Support for up to 24 fabric extenders (Layer 2) with each Cisco Nexus 5672UP, 5672UP-16G, and 56128P Switch● RDMA over Converged Ethernet (RoCE) using Data Center Bridging (DCB) support (DCB Exchange [DCBX] no drop and priority flow control [PFC]) |
| Layer 3 Features | ● Layer 3 interfaces: Routed ports, switch virtual interface (SVI), port channels, subinterfaces, and port-channel subinterfaces● Support for up to 32,000 IPv4 and 8000 IPv6 host prefixes● Support for up to 8000 multicast routes (IPv4)● Support for up to 8000 IGMP snooping groups● Support for 4000 Virtual Routing and Forwarding (VRF) entries● Support for up to 4096 VLANs● Equal-Cost Multipathing (ECMP) up to 64 ways● 4000 flexible ACL entries● Routing protocols: Static, Routing Information Protocol Version 2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First Version 2 (OSPFv2), Border Gateway Protocol (BGP), and Intermediate System-to-Intermediate System (IS-IS)● IPv6 routing protocols: Static, OPFv3, BGPv6, and EIGRPv6● IPv6 VRF-lite● BFD support: OSPFv2, BGPv4, EIGRP, and VRF instances● Policy-Based Routing (IPv4 and IPv6)● Hot-Standby Router Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)● IP direct broadcast● vPC+ routing protocol peering● ACL: Routed ACL with Layer 3 and 4 options to match ingress and egress ACL● Multicast: Protocol Independent Multicast Version 2 (PIMv2) sparse mode, Source-Specific Multicast (SSM), Bidir-PIM, Multicast Source Discovery Protocol (MSDP), IGMPv2 and v3, and Multicast VLAN Registration (MVR)● VRF: VRF-lite (IP VPN); VRF-aware unicast; and BGP-, OSPF-, RIP-, and VRF-aware multicast● Unicast Reverse-Path Forwarding (uRFP) with ACL; strict and loose modes● Jumbo frame support (up to 9216 bytes)● Support for up to 24 fabric extenders on each Cisco Nexus 5600 10-Gbps platform switch |
| Quality of Service (QoS) | ● Layer 2 IEEE 802.1p (class of service [CoS])● 8 unicast queues and 8 multicast queues per port● Per-port QoS configuration● CoS trust● Port-based CoS assignment● Modular QoS CLI (MQC) compliance: IPv4 and IPv6● ACL-based QoS classification (Layers 2, 3, and 4)● Flexible TCAM carving● MAC and ARP hardware carving● MQC CoS marking● Per-port virtual output queuing● CoS-based egress queuing● Egress strict-priority queuing● Egress port-based scheduling: Deficit Weighted Round-Robin (DWRR)● Control-Plane Policing (CoPP): IPv4 and IPv6 |
| Security | ● Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports● Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc.● Standard and extended Layer 3 and 4 ACLs: IPv4 and IPv6, Internet Control Message Protocol (ICMP and ICMPv6), TCP, User Datagram Protocol (UDP), etc.● Ingress policing● VLAN-based ACLs (VACLs)● Port-based ACLs (PACLs)● Named ACLs● Optimized ACL distribution● ACLs on virtual terminals (vtys)● ACL logging (IPv4 only)● Dynamic Host Configuration Protocol (DHCP) snooping with Option 82● Dynamic ARP Inspection● IP source guard● DHCP relay (up to 32 destinations)● Ethernet port security● IPv6 RACL, PACL, and VACL● iSCSI type-length-value (TLV) |
| High-Availability Features | ● Cisco In-Service Software Upgrade (ISSU) for Layer 2● Hot-swappable field-replaceable power supplies and fan modules● N+1 and N+N power redundancy● N+1 fan module redundancy |
| Management | ● Switch management using 10/100/1000-Mbps management or console ports● CLI-based console to provide detailed out-of-band management● In-band switch management● Port-based locator and beacon LEDs● Configuration synchronization● Configuration rollback● Secure Shell Version 2 (SSHv2)● Telnet● Authentication, authorization, and accounting (AAA)● AAA with RBAC● RADIUS● TACACS+● Syslog (8 servers)● Embedded packet analyzer● SNMPv1, v2, and v3 (IPv4 and IPv6)● Enhanced SNMP MIB support● XML (NETCONF) support● Remote monitoring (RMON)● Advanced Encryption Standard (AES) for management traffic● Unified username and passwords across CLI and SNMP● Microsoft Challenge Handshake Authentication Protocol (MS-CHAP)● Digital certificates for management between switch and RADIUS server● Cisco Discovery Protocol Versions 1 and 2● RBAC● SPAN on physical, PortChannel and VLAN● ERSPAN● Ingress and egress packet counters per interface● Network Time Protocol (NTP)● Cisco Generic Online Diagnostics (GOLD)● Comprehensive bootup diagnostic tests● Cisco Embedded Event Manager (EEM)● Cisco Call Home● Cisco Smart Call Home● Default Interface● Cisco Fabric Manager● Cisco Prime DCNM● CiscoWorks LAN Management Solution (LMS) |
| Data Center Bridging | ● CEE- and IEEE-compliant PFC (per-priority Pause frame support: IEEE 802.1Qbb)● PFC link distance support: 20 km● CEE-compliant DCBX Protocol● CEE- and IEEE-compliant enhanced transmission selection |
| FCoE Features (Require Storage Services License) | ● T11 standards-compliant FCoE (Fibre Channel-BB-5)● T11 FCoE Initialization Protocol (FIP) (Fibre Channel-BB-5)● Any 10 or 40 Gigabit Ethernet port configurable as FCoE● SAN administration separate from LAN administration● Fibre Channel forwarding (FCF)● Fibre Channel enhanced port types: VE, VF and VNP● Direct attachment of FCoE targets● Fabric Device Management Interface (FDMI)● Fibre Channel ID (FCID) persistence● Distributed device alias services● In-order delivery● Port tracking● Cisco FCoE NPV technology● N-port identifier virtualization (NPIV)● Fabric services: Name server, registered state change notification (RSCN), login services, and name-server zoning● Per-VSAN fabric services● Cisco Fabric Services● Distributed device alias services● Host-to-switch and switch-to-switch Fibre Channel-SP authentication● Fabric Shortest Path First (FSPF)● Standard zoning● Enhanced zoning● Cisco Fabric Analyzer● Cisco DCNM-SAN● Storage Management Initiative Specification (SMI-S)● Boot from SAN over vPC and Enhanced vPC (EvPC)● FCP● VSAN trunking● Fabric Device Management Interface (FDMI)● Fibre Channel ID (FCID) persistence● Distributed device alias services● In-order delivery● Port tracking● Cisco NPV technology● Fabric binding for Fibre Channel● Port security● Fibre Channel traceroute● Fibre Channel ping● Fibre Channel debugging |
| Generic MIBs | ● SNMPv2-SMI● CISCO-SMI● SNMPv2-TM● SNMPv2-TC● IANA-ADDRESS-FAMILY-NUMBERS-MIB● IANAifType-MIB● IANAiprouteprotocol-MIB● HCNUM-TC● CISCO-TC● SNMPv2-MIB● SNMP-COMMUNITY-MIB● SNMP-FRAMEWORK-MIB● SNMP-NOTIFICATION-MIB● SNMP-TARGET-MIB● SNMP-USER-BASED-SM-MIB● SNMP-VIEW-BASED-ACM-MIB● CISCO-SNMP-VACM-EXT-MIB |
| Layer 3 MIBs | ● UDP-MIB● TCP-MIB● OSPF-MIB● BGP4-MIB● CISCO-HSRP-MIB |
| Ethernet MIBs | ● CISCO-VLAN-MEMBERSHIP-MIB● CISCO-Virtual-Interface-MIB● CISCO-VTP-MIB |
| Configuration MIBs | ● ENTITY-MIB● IF-MIB● CISCO-ENTITY-EXT-MIB● CISCO-ENTITY-FRU-CONTROL-MIB● CISCO-ENTITY-SENSOR-MIB● CISCO-FLASH-MIB● CISCO-SYSTEM-MIB● CISCO-SYSTEM-EXT-MIB● CISCO-IP-IF-MIB● CISCO-IF-EXTENSION-MIB● CISCO-SERVER-INTERFACE-MIB● CISCO-NTP-MIB● CISCO-IMAGE-MIB● CISCO-IMAGE-CHECK-MIB● CISCO-IMAGE-UPGRADE-MIB● CISCO-CONFIG-COPY-MIB● CISCO-ENTITY-VENDORTYPE-OID-MIB● CISCO-BRIDGE-MIB |
| Monitoring MIBs | ● DIFFSERV-DSCP-TC● NOTIFICATION-LOG-MIB● DIFFSERV-MIB● CISCO-CALLHOME-MIB● CISCO-SYSLOG-EXT-MIB● CISCO-PROCESS-MIB● RMON-MIB● CISCO-RMON-CONFIG-MIB● CISCO-HC-ALARM-MIB● LLDP-MIB |
| Security MIBs | ● CISCO-AAA-SERVER-MIB● CISCO-AAA-SERVER-EXT-MIB● CISCO-COMMON-ROLES-MIB● CISCO-COMMON-MGMT-MIB● CISCO-RADIUS-MIB● CISCO-SECURE-SHELL-MIB● TCP/IP MIBs● INET-ADDRESS-MIB● TCP-MIB● CISCO-TCP-MIB● UDP-MIB● IP-MIB● CISCO-IP-PROTOCOL-FILTER-MIB● CISCO-DNS-CLIENT-MIB● CISCO-PORTSECURITY-MIB |
| Miscellaneous MIBs | ● START-MIB● CISCO-LICENSE-MGR-MIB● CISCO-FEATURE-CONTROL-MIB● CISCO-CDP-MIB● CISCO-RF-MIB● CISCO-ETHERNET-FABRIC-EXTENDER-MIB● CISCO-BRIDGE-MIB● CISCO-FCOE-MIB● CISCO-PORTCHANNEL-MIB● CISCO-ZS-MIB |
| Industry Standards | ● IEEE 802.1D: Spanning Tree Protocol● IEEE 802.1p: CoS prioritization● IEEE 802.1Q: VLAN tagging● IEEE 802.1Qaz: Enhanced transmission selection● IEEE 802.1Qbb: Per-priority Pause● IEEE 802.1s: Multiple VLAN instances of Spanning Tree Protocol● IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol● IEEE 802.3: Ethernet● IEEE 802.3ad: LACP with fast timers● IEEE 802.3ae: 10 Gigabit Ethernet● IEEE 802.3ba: 40 Gigabit Ethernet (Applies to 40G SR4, SR4-S, LR4, LR4-S, and CSR4 optics only)● SFF 8431 SFP+ CX1 support● RMON |
Get more information
Do you have any question about the N5K-C5672UP?
Contact us now via Live Chat or sales@metafinitivetech.com
