Placeholder
WS-X6704-10GE= (USED) Original price was: $1,458.00.Current price is: $1,385.10.
Back to products
PA-MC-8TE1+ (USED)
PA-MC-8TE1+ (USED) Original price was: $3,167.00.Current price is: $3,008.65.

WS-X45-SUP7-E

Original price was: $4,763.00.Current price is: $4,524.85.

Model: WS-X45-SUP7-E Catalyst 4500 E-Series Supervisor Engine
Details: Catalyst 4500 E-Series Supervisor Engine 7-E, 848Gbps
Condition: New Factory Sealed
Warranty: 3 Years Warranty.

Description

WS-X45-SUP7-E Overview

Quick Specs Figure 1 shows the appearance of WS-X45-SUP7-E.

Table 1 shows the Quick Specs.

Chassis compatibility All Catalyst 4500 E-series switches
Software requirements (minimum) Refer to your software release notes for the latest software release requirements
Chassis slot restrictions •Catalyst 4503-E: Slot 1 only•Catalyst 4506-E: Slot 1 only•Catalyst 4507R-E and Catalyst 4507R+E: Slot 3 and slot 4•Catalyst 4510R-E and Catalyst 4510R+E: Slot 5 and slot 6
Bandwidth per slot 48-Gbps
Memory 2-GB (upgrade to 4-GB)
STATUS LED The status LED indicates the current health of the supervisor engine and the current software state.
RESET switch The RESET switch is used to reset and restart the switch.NoteUse a paper clip or other small, pointed object to press the RESET switch.
ACTIVE SUP LED The active supervisor engine LED indicates whether the supervisor engine is active or in standby mode in redundant supervisor engine configurations.
UTILIZATION LEDs Eight LEDs indicate (as an approximate percentage) the current traffic load over the backplane.
USB connectors Two USB 2.0 ports are provided. Port 1 operates in device mode (upstream) and port 2 in host mode (downstream). Port 1 has a standard Type B USB connector and can be used as a USB console.Port 2 has a USB type A connector and a standard USB 2.0 device like a flash memory device can plug into this connector.
SECURE DIGITAL slot A standard Secure Data (SD) memory card interface is provided on the front panel
CONSOLE port This is a 10/100/1000 port that uses an RJ-45 connector. The console port allows you th access the switch either locally (with a console terminal) has an RJ-45 connector. The console port allows you to perform the following functions:•Configure the switch from the CLI•Monitor network statistics and errors•Configure SNMP agent parameters
10/100/1000 MGT port The Ethernet management port is a Layer 3 host port to which you can connect a PC. You can use the Ethernet management port instead of the switch console port for network management. When managing a switch, connect the PC to the Ethernet management port on a Catalyst 4500 E-series switch.NoteWhen connecting a PC to the Ethernet management port, you must assign an IP address.
LINK LED The 10/100/1000 MGT port has a link LED associated with it.
1G/10G UPLINKS (SFP/SFP+) ports The Supervisor Engine 7-E has four 1-G or 10-G ports that use either SFP transceivers or SFP+ transceivers.
Uplink port LEDs Each of the four uplink ports has two LEDs associated with it. One LED displays port status when a 1-GB SFP transceiver is installed in the port socket. The second LED displays uplink port status when a 10-GB SFP+ transceiver is installed in the port socket.
Power requirement 302 W
Operating temperature Certified for operation: 32° to 104°F (0° to 40°C)•Designed and tested for operation: 32° to 130°F (0° to 55°C)
Humidity (RH) ambient (noncondensing) 10 to 90%
Operating altitude Certified for operation: 0 to 6500 ft (0 to 2000 m)•Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)
STATUS The STATUS LED indicates the status of he supervisor engine.Green—All diagniostic tests have passedOrange—System boot or a diagnostic test is in progress.Red—A diagnostic test failed.Off—The supervisor engine is disabled or is not powered up.
ACTIVE SUP Indicates whether the supervisor engine is active or standby.Green—Supervisor engine is active (in redundant supervisor engine configurations)Off—Supervisor engine is in standby mode (in redundant supervisor engine configurations)
UTILIZATION When the switch is operational, the eight utilization LEDs indicate the current traffic load over the backplane as an approximate percentage value. Each LED lit green indicates approximately 12.5 percent of load.
MGT port Indicates the status of the 10/100/1000BASE-T Ethernet management portGreen—The link is operational.Orange—The link is disabled by user.Flashing orange—The power-on self-test indicates a faulty port.Off—No signal is detected or there is a link configuration failure.
Uplink link Indicates the status of the uplink portGreen—The link is operational.Orange—The link is disabled by user.Flashing orange—The power-on self-test indicates a faulty port.Off—No signal is detected or there is a link configuration failure.

Get more information
Do you have any question about the WS-X45-SUP7-E?
Contact us now via Live Chat or sales@metafinitivetech.com

Warrenty Description

100% Low Price Guarantee: Metafinitivetech.com provides high-quality products at low wholesale prices

100% Quality Assurance: All items are ORIGINAL and GENUINE only. Item conditions are “New Sealed” or “Used / Refurbished”. Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support: Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee: You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment: Verified authorization: Mcafee Secure, VeriSign Secured