-5%
WS-X6908-10G-2TXL
Model: WS-X6908-10G-2TXL Cisco Catalyst 6500 Series Ethernet Module
Details: Cisco 6500 Module WS-X6908-10G-2TXL C6K 8 port 10 Gigabit Ethernet module with DFC4XL (Trustsec)
Condition: New Factory Sealed
Warranty: 3 Years Warranty.
Description
WS-X6908-10G-2TXL Overview
Quick Specs Figure 1 shows the appearance of WS-X6908-10G-2TXL.
Table 1 shows the Quick Specs.
| Standard protocols | IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3aq, and IEEE 802.3an |
| Physical specifications | ● Occupies one slot in the Cisco Catalyst 6500 E-Series chassis● Dimensions (H x W x D): 1.73 x 14.4 x 16 in. (4.4 x 36.6 x 40.6 cm)● Weight: 12.6 pounds excluding X2 components; ¼ pound for each X2 |
| Environmental conditions | Operating temperature:● Agency-certified for operation: 32 to 104°F (0 to 40°C)● Design and tested for operation 32 to 130°F (0 to 55°C)● Storage temperature: -40 to 167°F (-40 to 75°C)● Relative humidity: 10 to 90 percent, noncondensingOperating altitude:● Agency-certified for operation: -500 to 6500 ft (-150 to 2000m)● Designed and tested for operation -500 to 10000 ft (-150 to 3000m) |
| Regulatory compliance | Cisco Catalyst 6500 Series 10 Gigabit Ethernet Fiber modules, when installed in a system, comply with the following EMC and safety standards:EMC Standards:● FCC Part 15 (CFR 47) Class A● ICES-003 Class A● VCCI Class A● EN55022 Class A● EN55024● CISPR24● CISPR 22 Class A● AS/NZS CISPR 22 Class A● ETS 300 386● KN 22 Class A● EN61000-3-2● EN61000-3-3● CNS13438 Class ASafety Standards:● UL 60950-1● CAN/CSA C22.2 No. 60950● EN 60950-1● IEC 60950-1● AS/NZS 60950-1 |
| NEBS criteria levels | SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)[2] |
| ETSI | ● ETS 300 019-2-1, Class 1.2 Storage● ETS 300 019-2-2, 2.3 Transportation● ETS 300 019-2-3, Class 3.2 Stationary Use |
| Network management | ● ETHERLIKE-MIB (RFC 1643)● IP-MIB and IP-FORWARD-MIB for IPv6● IF-MIB (RFC 1573)● Bridge MIB (RFC 1493)● CISCO-STACK-MIB● CISCO-VTP-MIB● CISCO-CDP-MIB● RMON MIB (RFC 1757)● CISCO-PAGP-MIB● CISCO-STP-EXTENSIONS-MIB● CISCO-VLAN-BRIDGE-MIB● CISCO-VLAN-MEMBERSHIP-MIB● ENTITY-MIB (RFC 2037)● HC-RMON● RFC1213-MIB (MIB-II)● SMON-MIB |
| Power requirements | ● WS-X6908-10G-2TXL: 603 Watts Maximum● At the time of the writing of this datasheet, the final power numbers are not known. Please consult the 12.2(50)SY Release Notes for these numbers if they are not provided here. |
| Indicators | ● Status: green (operational), red (faulty), and orange (module booting)● Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)● Blue Beacon: Used to ID a specific module in a fully populated system, within a multi-system environment |
Get more information
Do you have any question about the WS-X6908-10G-2TXL?
Contact us now via Live Chat or sales@metafinitivetech.com
